Dealing With Fire and Flood Damage – Speed Drying

Flood and fire damage are sadly not uncommon, and after the damage is done, someone has to clean up. The British Damage Management Association (BDMA) has always promoted the use of professionally qualified companies and technicians, working to minimum standards, to tackle fire and flood restoration. But in cases such as these, you really are against the clock.

To prevent mould and mildew problems, you’ve got to have the area dried and cleaned as fast as possible. Using a speed drying system, such as Dryair, can dramatically cut drying time and overall damage to flooded properties.

The Dryair machine used by The Ideal Group is one of a few. Not only is it able to speed dry flood damaged fabrics, but it can also decontaminates them too. This serves two purposes:

1) It will clean, disinfect, deodorize, and kill dust mites and mould, which can cause allergies and disease

2) It may mean that you don’t have to get rid of things you’d otherwise have to. As long as the damage is treated properly and quickly, many items can potentially be saved, that would otherwise be lost.

Afterwards, there are a few steps you will want to take. Mercia Tapping, President of AllergyBuyersClub.com recommends the following:

“Exercise caution when first entering your home. If there is still standing water, it is prudent to wear rubber boots and gloves. Turn the electricity off at the breaker box and get all electrical appliances and extension cords up on higher ground dry them out. Make sure your home is structurally safe, which means looking out for broken sharp objects on the floor and anything you might trip over.

Boil all drinking water or use bottled water. All drinking water should be either boiled, put through a water purifier or use bottled water. Areas that are dry but have been exposed to sewage should be thoroughly washed down with a solution of household bleach and water. We recommend a 25% bleach to water solution.

If in doubt, throw it out. Toss out all water damaged rugs, particle board furniture, mattresses, suitcases, food, even photographs and books, and follow your local authority guidelines for disposal. Many electrical appliances will not survive if they have been submerged in water. Dishwashers, refrigerators and vacuum cleaners are cheaper to replace than repair. Use rubber gloves and mask to clean loose debris to not inhale any toxic particles.

Wash and dry everything you can. This includes water soaked bedding, towels, drapes, cushions and clothing using the hot sanitizing cycle on your washing machine. Dry clean heat sensitive textiles. Put dishes through the dishwasher on hot cycle.

Remove remaining water and dehumidify damp areas. Clean up the last standing water with a portable submersible sump pump and a wet dry vac. Then use a high capacity, low temperature dehumidifier to take care of the rest. An auxiliary or built in pump makes this task a lot easier. It is important to open windows and ventilate rather than turn on the heat high [about 50°F] in the house or use fans, which is an invitation to grow mould spores and spread them around the house. Do not try to dry out the house too quickly, because if you do it will cause wood floors to warp and buckle.

Clean all surfaces thoroughly. Wash down all surfaces, such walls, cabinets, basement floors including those which were not in direct flood contact with your bleach solution. Then wipe down with clear water. Using a vapour steam cleaner on all surfaces to disinfect is an even better solution.

Check for interior and structural damage. Remove dry wall up to and 2 feet above flood levels on walls and remove all insulation which came in contact with flood waters. It is imperative to do this if you want to avoid future mould problems. We have heard too many horror stories from people whose houses became infested with toxic mould - so it is not worth taking a chance and skipping this step. Replace hardwood flooring especially all sub floors if they have been flood soaked. Keep ventilating with fresh air until the house is completely dry. Have the duct work professionally cleaned after the house has dried out.

Inspect your electrical and plumbing systems. Have an professional electrician inspect your electrical systems and appliances. Replace all filters and switches. Check your furnace, as a burnout of the motor may be imminent. Make sure your plumbing and toilet facilities are working.”

Employ these steps, and act fast, and you can avoid most of the damage and costs most people suffer.

Article Source
This article is property of Ideal Group UK – Fire and Flood Restoration Company in Kent. For more information on our commercial and domestic cleaning and restoration services, visit our website www.idealgroupuk.co.uk.
Re-distribution of this article is permitted only if the following conditions are met:

Do not remove the link to the article source
No changes are made to the article content or article source.
You agree and understand that Ideal Group UK Ltd is the owner of the exclusive copyright of this article.

Articles

Dealing With Fire and Flood Damage – Speed Drying